BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Platinum Training Solutions - ECPv6.6.4.2//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://platinumtrainingsolutions.com.au
X-WR-CALDESC:Events for Platinum Training Solutions
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20260101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260511
DTEND;VALUE=DATE:20260516
DTSTAMP:20260420T193136
CREATED:20260313T021120Z
LAST-MODIFIED:20260313T021120Z
UID:3429-1778457600-1778889599@platinumtrainingsolutions.com.au
SUMMARY:Non-Slew Crane - HRWL
DESCRIPTION:TLILIC0040 – Licence to Operate a Non-Slewing Mobile Crane (Greater than 3 Tonnes Capacity)  \nUnit of Competency \nThis course provides the essential skills and knowledge required to safely operate a non-slewing mobile crane with a Rated Capacity (RC) exceeding three tonnes\, in compliance with all relevant legislative responsibilities. Please note that completing this unit does not automatically grant a High Risk Work Licence (HRWL) to operate this equipment\, nor does it permit driving an articulated mobile crane on public roads without a valid heavy vehicle licence issued by a transport regulator. \nCourse Highlights: \n\nNon-Slewing Mobile Crane Operation: Learn to operate mobile cranes with a boom or jib that cannot be slewed\, including articulated and locomotive cranes (excluding vehicle tow trucks).\nPlanning and Preparation: Understand how to plan and prepare for crane tasks\, ensuring all safety protocols are followed.\nTask Performance: Gain practical experience in performing various crane tasks\, including lifting\, moving\, and positioning loads.\nRoad Preparation and Driving: Learn the procedures for preparing and driving an articulated mobile crane on roads.\nPack Up: Master the correct procedures for packing up and securing the crane after use.\n\nIndustry Relevance \nOperating a non-slewing mobile crane is a critical skill in many industries\, including construction and logistics. This course ensures you are well-prepared to handle these tasks safely and efficiently. \nLicensing/Regulatory Information \nTo perform this work\, you must hold a non-slewing mobile crane HRWL. This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth\, State\, and Territory HRWL requirements. \nPrerequisites \nThere are no prerequisite units for this course. \nDuration \nThe course is conducted over 5 days. \nEntry Requirements for High Risk Work Licence (HRWL) Courses \nTo enroll in a High Risk Work Licence (HRWL) course at Platinum Training Solutions\, participants must meet the following entry requirements: \n\nParticipants must be at least 18 years of age.\nParticipants need to provide 100 points of identification\, including photo ID\, to verify their identity.\nParticipants must have a basic command of the English language. This includes the ability to read\, comprehend\, and write a range of texts\, and effectively respond to spoken language.\nParticipants should possess a basic ability in mathematics\, particularly for understanding formulas and load chart calculations.\nParticipants must have the necessary health and fitness levels to carry out their duties safely.\n\nWe look forward to supporting you in achieving your qualifications at Platinum Training Solutions.
URL:https://platinumtrainingsolutions.com.au/event/non-slew-crane-hrwl-3/
CATEGORIES:TLILIC0040 - Licence to Operate a Non-Slewing Mobile Crane (Greater than 3 Tonnes Capacity)
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260518
DTEND;VALUE=DATE:20260523
DTSTAMP:20260420T193136
CREATED:20260313T020637Z
LAST-MODIFIED:20260403T231750Z
UID:3425-1779062400-1779494399@platinumtrainingsolutions.com.au
SUMMARY:Intermediate Rigging Course - HRWL
DESCRIPTION:CPCCLRG3002 Licence to perform rigging intermediate level \nUnit of Competency \nThis course delivers the fundamental skills and knowledge needed to perform Intermediate rigging tasks safely\, adhering to all legislative requirements. Please note that completing this unit alone does not automatically qualify individuals for a High Risk Work Licence (HRWL) for rigging activities. \nCourse Highlights: \n\nIntermediate Rigging Operations: Learn to safely use mechanical load-shifting equipment and associated tools to move\, position\, or secure more complex loads\, such as plant components\, equipment\, and structural elements.\nComprehensive Planning and Preparation: Develop the skills to plan and prepare for intermediate rigging tasks\, ensuring strict compliance with safety protocols and legislative requirements.\nPractical Task Execution: Gain hands-on experience with intermediate rigging activities\, including tasks involving hoists with jibs or self-climbing mechanisms\, cranes\, conveyors\, and tilt-up concrete panels.\nEquipment Dismantling and Storage: Master proper procedures for dismantling and securely packing up intermediate rigging tools and equipment.\n\nIndustry Relevance \nRigging expertise is vital for construction and other industries where load shifting equipment is utilised. This course equips participants to handle these tasks with confidence and safety. \nLicensing/Regulatory Information \nA valid High Risk Work Licence (HRWL) is mandatory to perform rigging work. This unit complies with the licensing requirements outlined in Part 4.5 of the Model Work Health and Safety (WHS) Regulations\, meeting all relevant national and regional standards. \nPrerequisites \nCPCCLRG3001 Licence to perform rigging basic level \nCourse Duration \nThis course is conducted over 5 days \nEntry Requirements for High Risk Work Licence (HRWL) Courses \nTo enrol in a High Risk Work Licence (HRWL) course at Platinum Training Solutions\, participants must meet the following entry requirements: \n\nParticipants must be at least 18 years of age.\nParticipants need to provide 100 points of identification\, including photo ID\, to verify their identity.\nParticipants must have a basic command of the English language. This includes the ability to read\, comprehend\, and write a range of texts\, and effectively respond to spoken language.\nParticipants should possess a basic ability in mathematics\, particularly for understanding formulas and load chart calculations.\nParticipants must have the necessary health and fitness levels to carry out their duties safely.\n\nWe look forward to supporting you in achieving your qualifications at Platinum Training Solutions. \n 
URL:https://platinumtrainingsolutions.com.au/event/intermediate-rigging-course-hrwl-3/
CATEGORIES:CPCCLRG3002 - Licence to perform rigging intermediate level
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260525
DTEND;VALUE=DATE:20260530
DTSTAMP:20260420T193136
CREATED:20260403T232200Z
LAST-MODIFIED:20260403T232200Z
UID:3436-1779667200-1780099199@platinumtrainingsolutions.com.au
SUMMARY:Basic Scaffolding Course - HRWL
DESCRIPTION:CPCCLSF2001 – Licence to Erect\, Alter\, and Dismantle Scaffolding Basic Level  \nUnit of Competency \nThis course equips you with the essential skills and knowledge to safely perform basic scaffolding work. You will learn to erect\, alter\, and dismantle temporary structures that support platforms from which a person or object could fall more than four metres. \nCourse Highlights: \n\nModular or Pre-Fabricated Scaffolds: Learn to work with various types of scaffolding systems.\nCantilevered Materials Hoists: Operate hoists with a maximum working load of 500 kg.\nRopes and Gin Wheels: Master the use of ropes and gin wheels for lifting and moving materials.\nSafety Nets and Static Lines: Ensure safety with the correct use of nets and lines.\nBracket Scaffolds: Gain expertise in erecting and dismantling tank and formwork scaffolds.\n\nIndustry Relevance \nScaffolding work is crucial in the construction industry and other sectors where temporary structures are erected\, altered\, and dismantled. This course ensures you are well-prepared to handle these tasks safely and efficiently. \nPrerequisites \nThere are no prerequisite units for this course. However\, completion of the general construction induction training program\, as specified in the Safe Work Australia model Code of Practice: Construction Work\, is required for anyone carrying out construction work. Achievement of CPCCWHS1001 – Prepare to Work Safely in the Construction Industry meets this requirement. \nDuration \nThe course is conducted over 5 days. \n  \n 
URL:https://platinumtrainingsolutions.com.au/event/basic-scaffolding-course-hrwl-6/
CATEGORIES:CPCCLSF2001 - Licence to Erect, Alter, and Dismantle Scaffolding Basic Level
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260601
DTEND;VALUE=DATE:20260606
DTSTAMP:20260420T193136
CREATED:20260403T234802Z
LAST-MODIFIED:20260403T234802Z
UID:3449-1780272000-1780703999@platinumtrainingsolutions.com.au
SUMMARY:Dogging Course - HRWL
DESCRIPTION:CPCCLDG3001 – Licence to perform dogging \nUnit of Competency \nThis course equips you with the essential skills and knowledge to safely perform dogging work. You will learn to apply slinging techniques to move loads\, select and inspect lifting gear\, and direct plant operators when loads are out of their sight. \nCourse Highlights: \n\nSlinging Techniques: Master the application of slinging techniques to safely move loads.\nLifting Gear: Learn to select and inspect various types of lifting gear.\nDirecting Operators: Gain the skills to effectively direct plant operators during load movements.\n\nIndustry Relevance \nDogging work is crucial in the construction industry and other sectors where loads are lifted and moved using cranes or hoists. This course ensures you are well-prepared to handle these tasks safely and efficiently. \nPrerequisites \nThere are no prerequisite units for this course. However\, completion of the general construction induction training program\, as specified in the Safe Work Australia model Code of Practice: Construction Work\, is required for anyone carrying out construction work. Achievement of CPCCWHS1001 – Prepare to Work Safely in the Construction Industry meets this requirement. \nDuration \nThe course is conducted over 5 days. \nEntry Requirements for High Risk Work Licence (HRWL) Courses \nTo enroll in a High Risk Work Licence (HRWL) course at Platinum Training Solutions\, participants must meet the following entry requirements: \n\nParticipants must be at least 18 years of age.\nParticipants need to provide 100 points of identification\, including photo ID\, to verify their identity.\nParticipants must have a basic command of the English language. This includes the ability to read\, comprehend\, and write a range of texts\, and effectively respond to spoken language.\nParticipants should possess a basic ability in mathematics\, particularly for understanding formulas and load chart calculations.\nParticipants must have the necessary health and fitness levels to carry out their duties safely.\n\nWe look forward to supporting you in achieving your qualifications at Platinum Training Solutions.
URL:https://platinumtrainingsolutions.com.au/event/dogging-course-hrwl-10/
CATEGORIES:CPCCLDG3001 - Licence to perform dogging
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260608
DTEND;VALUE=DATE:20260613
DTSTAMP:20260420T193136
CREATED:20260403T232348Z
LAST-MODIFIED:20260403T232348Z
UID:3439-1780876800-1781308799@platinumtrainingsolutions.com.au
SUMMARY:Intermediate Scaffolding Course - HRWL
DESCRIPTION:CPCCLSF3001 – Licence to Erect\, Alter\, and Dismantle Scaffolding Intermediate Level  \nUnit of Competency Details \nThis course provides the essential skills and knowledge required to safely perform intermediate scaffolding work. You will learn to erect\, alter\, and dismantle temporary structures that support platforms from which a person or object could fall more than four metres. \nCourse Highlights: \n\nCantilevered Crane Loading Platforms: Gain expertise in working with cantilevered crane loading platforms.\nCantilevered and Spur Scaffolds: Learn to erect and dismantle cantilevered and spur scaffolds.\nBarrow Ramps and Sloping Platforms: Master the setup and use of barrow ramps and sloping platforms.\nPerimeter Safety Screens and Shutters: Understand scaffolding associated with perimeter safety screens and shutters.\nMast Climbing Work Platforms: Operate and maintain mast climbing work platforms.\nTube and Coupler Scaffolds: Work with tube and coupler scaffolds\, including covered ways and gantries.\n\nIndustry Relevance \nIntermediate scaffolding work is crucial in the construction industry and other sectors where temporary structures are erected\, altered\, and dismantled. This course ensures you are well-prepared to handle these tasks safely and efficiently. \nPrerequisites \nTo enroll in this course\, you must have successfully completed the CPCCLSF2001 – Licence to Erect\, Alter\, and Dismantle Scaffolding Basic Level or hold a valid licence for basic scaffolding. Additionally\, completion of the general construction induction training program\, as specified in the Safe Work Australia model Code of Practice: Construction Work\, is required for anyone carrying out construction work. Achievement of CPCCWHS1001 – Prepare to Work Safely in the Construction Industry meets this requirement. \nDuration \nThe course is conducted over 5 days. \nEntry Requirements for High Risk Work Licence (HRWL) Courses \nTo enroll in a High Risk Work Licence (HRWL) course at Platinum Training Solutions\, participants must meet the following entry requirements: \n\nParticipants must be at least 18 years of age.\nParticipants need to provide 100 points of identification\, including photo ID\, to verify their identity.\nParticipants must have a basic command of the English language. This includes the ability to read\, comprehend\, and write a range of texts\, and effectively respond to spoken language.\nParticipants should possess a basic ability in mathematics\, particularly for understanding formulas and load chart calculations.\nParticipants must have the necessary health and fitness levels to carry out their duties safely.\n\nWe look forward to supporting you in achieving your qualifications at Platinum Training Solutions.
URL:https://platinumtrainingsolutions.com.au/event/intermediate-scaffolding-course-hrwl-8/
CATEGORIES:CPCCLSF3001 - Licence to Erect, Alter, and Dismantle Scaffolding Intermediate Level
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260615
DTEND;VALUE=DATE:20260618
DTSTAMP:20260420T193136
CREATED:20260403T232623Z
LAST-MODIFIED:20260403T232623Z
UID:3446-1781481600-1781740799@platinumtrainingsolutions.com.au
SUMMARY:Elevating Work Platform (EWP) – HRWL
DESCRIPTION:TLILIC0005 – Licence to Operate a Boom-Type Elevating Work Platform (Boom Length 11 Metres or More)  \nUnit of Competency \nThis course provides the essential skills and knowledge required to safely operate a boom-type Elevating Work Platform (EWP) with a boom length of 11 metres or more\, in compliance with all relevant legislative requirements. Please note that completing this unit does not automatically grant a High Risk Work Licence (HRWL) to operate this equipment. \nCourse Highlights: \n\nBoom-Type EWP Operation: Learn to operate telescoping\, hinged\, or articulated devices\, or any combination thereof\, used to support a platform for elevating personnel\, equipment\, and materials.\nPlanning and Preparation: Understand how to plan and prepare for EWP tasks\, ensuring all safety protocols are followed.\nTask Performance: Gain practical experience in performing various EWP tasks\, including lifting\, moving\, and positioning loads.\nPack Up: Learn the correct procedures for packing up and securing the EWP after use.\n\nIndustry Relevance \nOperating a boom-type EWP is a critical skill in many industries\, including construction\, maintenance\, and logistics. This course ensures you are well-prepared to handle these tasks safely and efficiently. \nLicensing/Regulatory Information \nTo perform this work\, you must hold a boom-type EWP High Risk Work Licence (HRWL). This unit is based on the licensing requirements of Part 4.5 of the Model Work Health and Safety (WHS) Regulations and meets Commonwealth\, State\, and Territory HRWL requirements. \nPrerequisites \nWorking at heights \nDuration \nThe course is conducted over 3 days. \nEntry Requirements for High Risk Work Licence (HRWL) Courses \nTo enroll in a High Risk Work Licence (HRWL) course at Platinum Training Solutions\, participants must meet the following entry requirements: \n\nParticipants must be at least 18 years of age.\nParticipants need to provide 100 points of identification\, including photo ID\, to verify their identity.\nParticipants must have a basic command of the English language. This includes the ability to read\, comprehend\, and write a range of texts\, and effectively respond to spoken language.\nParticipants should possess a basic ability in mathematics\, particularly for understanding formulas and load chart calculations.\nParticipants must have the necessary health and fitness levels to carry out their duties safely.\n\nWe look forward to supporting you in achieving your qualifications at Platinum Training Solutions.
URL:https://platinumtrainingsolutions.com.au/event/elevating-work-platform-ewp-hrwl-14/
CATEGORIES:TLILIC0005 - Licence to Operate a Boom-Type Elevating Work Platform (Boom Length 11 Metres or More)
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20260622
DTEND;VALUE=DATE:20260627
DTSTAMP:20260420T193136
CREATED:20260403T232525Z
LAST-MODIFIED:20260403T232525Z
UID:3443-1782086400-1782518399@platinumtrainingsolutions.com.au
SUMMARY:Advanced Scaffolding Course - HRWL
DESCRIPTION:CPCCLSF4001 – Licence to Erect\, Alter\, and Dismantle Scaffolding Advanced Level  \nUnit of Competency Details \nThis course provides the essential skills and knowledge required to safely perform advanced scaffolding work. You will learn to erect\, alter\, and dismantle temporary structures that support platforms from which a person or object could fall more than four metres. \nCourse Highlights: \n\nCantilevered Hoists: Gain expertise in working with cantilevered hoists.\nHung Scaffolds: Learn to erect and dismantle hung scaffolds\, including those suspended from tubes\, wire ropes\, or chains.\nSuspended Scaffolds: Master the setup and use of suspended scaffolds.\n\nIndustry Relevance \nAdvanced scaffolding work is crucial in the construction industry and other sectors where temporary structures are erected\, altered\, and dismantled. This course ensures you are well-prepared to handle these tasks safely and efficiently. \nPrerequisites \nTo enroll in this course\, you must have successfully completed the CPCCLSF3001 – Licence to Erect\, Alter\, and Dismantle Scaffolding Intermediate Level or hold a valid licence for intermediate scaffolding. Additionally\, completion of the general construction induction training program\, as specified in the Safe Work Australia model Code of Practice: Construction Work\, is required for anyone carrying out construction work. Achievement of CPCCWHS1001 – Prepare to Work Safely in the Construction Industry meets this requirement. \nDuration \nThe course is conducted over 5 days. \nEntry Requirements for High Risk Work Licence (HRWL) Courses \nTo enroll in a High Risk Work Licence (HRWL) course at Platinum Training Solutions\, participants must meet the following entry requirements: \n\nParticipants must be at least 18 years of age.\nParticipants need to provide 100 points of identification\, including photo ID\, to verify their identity.\nParticipants must have a basic command of the English language. This includes the ability to read\, comprehend\, and write a range of texts\, and effectively respond to spoken language.\nParticipants should possess a basic ability in mathematics\, particularly for understanding formulas and load chart calculations.\nParticipants must have the necessary health and fitness levels to carry out their duties safely.\n\nWe look forward to supporting you in achieving your qualifications at Platinum Training Solutions.
URL:https://platinumtrainingsolutions.com.au/event/advanced-scaffolding-course-hrwl-9/
CATEGORIES:CPCCLSF4001 - Licence to Erect, Alter, and Dismantle Scaffolding Advanced Level
END:VEVENT
END:VCALENDAR